Full Description

Ultimate Amp Design

Delivering incredibly tight, crisp and natural sound, the KM750 power amp features a revolutionary accelerated transient response with rail tracking. Transient response is where the woofer cone matches bass tones and reacting accordingly to create sounds with maximum clarity. The rail tracking technology modulates the power supply rails with the peaks of the input signal for an efficient performance.

Simple Operation

The front panel of the KM750 is home to the critical controls of the power amp such as the power button and the power LED indicator to show when the device is active. Each channel features gain controls with signal LEDs and clip LEDs, both showing when a signal is connected and when the input level needs to be reduced. The rear panel features the XLR, 1/4'' TRS unbalanced, 1/4'' TS and RCA connections for flexible compatibility. To connect speakers, users can choose between professional locking speaker outputs (SpeakOn) or the touch-proof binding posts. The rear panel also contains switches for mono, stereo and mono bridge mode as well as the limiter on/off switch which activates the integrated overload protection component.


  • 2 x 400-watts into 4 Ω; 2 x 200-watts into 8Ω; 750-watts into 8Ω; (bridge mode)
  • Accelerated transient response technology Switchable limiters offer maximum output level with reliable overload protection
  • Precise power, signal & clip LEDs
  • XLR, 1/4'' TRS & RCA input connectors
  • Professional speaker connectors & 'touch-proof' binding posts support variety of speaker wiring systems
  • Independent DC & short circuit protection on each channel
  • High-current toroidal transformer
  • Active cooling on heatsink
  • Impact resistant housing & all-steel 2U rackmount chassis


  • Maximum Output Power
    • 8Ω Per Channel, Both Channels Driven: 200W
    • 4Ω Per Channel, Both Channels Driven: 400W
    • 8Ω, Bridge Mode: 750W
  • Connectors
    • Inputs: 2 x XLR, 2 x 1/4'' TRS, 2 x RCA
  • Input Impedance
    • XLR / 1/4'' TRS: 30kΩ Balanced / 15kΩ Unbalanced
    • RCA: 14kΩ Unbalanced
    • Outputs: 2 x Locking-Style Professional Speaker Connector, Binding Post
  • System
    • Output Circuit Type: Class-AB, Complementary Linear Output
    • Circuit Protection: Short Circuit Current, DC Fault, AC Fuse, Limiter, Thermal Cut
    • Distortion: <0.02 Percent
    • Damping Factor: >245 @ 8Ω
    • Frequency Response (@ -10 dB Below Rated Output Power): 20Hz to 20kHz, +0/-0.5 dB
    • Frequency Response (@ -3 dB): 10Hz to 80kHz
    • Signal-To-Noise: >100 dB (Unweighted, 20Hz to 20kHz)
    • Voltage Gain @ Level Control Max: 32 dB
    • Input Sensitivity@ Level Control Max: 0.77 V / 26 dB / 1.4 V, Switchable
  • Controls
    • Front: Power Switch, Level Control
    • Rear: Sensitivity, Limiter, Ground/Lift, Mode Switch
  • Indicators
    • Power: White LED
    • Signal: Green LED
    • Clip: Red LED
    • Protection: Yellow LED
    • Mono Mode: Yellow LED
    • Bridge Mode: Yellow LED
  • Power Supply
    • USA/Canada: 120V, 60Hz
    • UK/Australia/Europe: 220-240V, 50/60Hz
    • Korea/China: 220-240V, 50/60Hz
    • Japan: 100V, 50/60Hz
  • Power Consumption @ 1/8 Rated Power: 400W
  • Mains Connection: Standard IEC Receptacle
  • Weight: 8.5 kg
  • Dimensions
    • Height: 88 mm
    • Width: 482 mm
    • Depth: 317 mm

Write a review

Note: HTML is not translated!
    Bad           Good

Behringer KM750 Professional 750W Stereo Power Amplifier

  • Brand: Behringer
  • Product Code: Behringer KM750 Professional 750W Stereo Power Amplifier
  • Availability: Pre-Order
  • 496.00 лв.

Technical support

Stock technical support:

Technical support:
+359 899 113 934 
Hristo Bratanov
email: bratanov@pipaudio.com